• Media Converter
  • Media Converter
  • Media Converter
  • Media Converter
  • TW-AC192-XXC SFP+ Direct Attach Active Copper Cables

  • ItemNo.: TW-AC192-XXC
  • Length:1m/3m/5m/7m/10m
  • Data Rate:10G
  • Typical:Active Copper

Features

Support for multi-gigabit  data rates up to 10.5Gbps
Data rates backward  compatible to 1Gbps
Hot-pluggable SFP 20PIN  footprint
I/O Connector designed  for high speed
differential signal applications
Improved Pluggable  Form Factor(IPF) compliant
for enhanced EMI/EMC  performance
Low Power Consumption  < 0.5W
Power Supply :+3.3V
Compatible to SFP+  MSA
Temperature Range:  0~ 70  °C
RoHS Compatible


Applications
High capacity I/O in Storage  Area Networks, Network Attached  Storage, and Storage Servers
Switched fabric I/O such  as ultra high bandwidth switches  and routers
Data center cabling infrastructure
High density connections  between networking equipment


Product Description
The SFP+ active cable assemblies  are high performance, cost effective I/O solutions  for 10Gb Ethernet
and 10G Fiber Channel  applications. SFP+ copper modules  allow hardware manufactures  to achieve
high port density, configurability  and utilization at a very low cast  and reduced power budget. The  high
speed cable assemblies  meet and exceed Gigabit Ethernet  and Fiber Channel industry standard requirements for performance  and reliability.

Recommended Operating  Conditions

Parameter
Symbol
Min
Typical
Max
Unit
Storage Ambient Temperature

-40

+85
°C
Operating Case Temperature
Tc
0
+70
°C
Power Supply Voltage
VCC3
3.14
3.3 3.47
V
Power Dissipation
PD


0.5 W

Systems

Performance
Media
Operating parameters
10.5Gbps line speed, full duplex
Bit error rate: better than 10E-12

Hot-pluggable, industry-standard Small

Form-Factor

Pluggable(SFP+) copper cable,
available max 10m

Supply voltage: 3.3V

Power consumption(per end): max 0.5W


Pin Descriptions


Pin
Logic
Symbol
Name/Description
Notes
1 LV-TTL-O
VeeT
Transmitter Ground

2 LV-TTL-I
TX_Fault
N/A
1
3 TX_Fault
TX_DIS
Transmitter Disable

4 LV-TTL-I/O
SDA
Tow Wire Serial Data

5 LV-TTL-I
SCL
Tow Wire Serial Clock

6
MOD_DEF0
Module present, connect to VeeT

7 LV-TTL-I
RS0
N/A
1
8 LV-TTL-O
RS0
LOS of Signal

9 LV-TTL-I
RS1
N/A
1
10
VeeR
Reciever Ground

11
VeeR
Reciever Ground

12 CML-O
RD-
Reciever Data Inverted

13 CML-O
RD+
Reciever Data Non-Inverted

14
VeeR
Reciever Ground

15
VccR
Reciever Supply 3.3V

16
VccT
Transmitter Supply 3.3V

17
VeeT
Transmitter Ground


18 CML_I
TD+
Transmitter Data Non-Inve
19 CML_I
TD+
Transmitter Data Inverted

20
VeeT
Transmitter Ground


1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor

Mechanical Dimensions



Fast Links to Fiber Optics